Dse Loop

DSE Loop: Autonomous Design Space Exploration

🔁 Do not wrap this skill in `/loop` / `CronCreate`. It already loops internally until its objective is met or it times out. Unlike the verdict-bearing review/audit skills, its stop gate is an objective machine-checkable metric (Type-A), so its self-termination is safe same-model — the reason not to wrap it is scheduler duplication, not the verdict fence. See `shared-references/external-cadence.md`.

Autonomously explore a design space: run → analyze → pick next parameters → repeat, until the objective is met or timeout is reached. Designed for computer architecture and EDA problems.

Context: $ARGUMENTS

Safety Rules — READ FIRST

NEVER do any of the following:

• sudo anything
• rm -rf, rm -r, or any recursive deletion
• rm any file you did not create in this session
• Overwrite existing source files without reading them first
• git push, git reset --hard, or any destructive git operation
• Kill processes you did not start

If a step requires any of the above, STOP and report to the user.

Constants (override via $ARGUMENTS)

Override inline: /dse-loop "task desc — timeout: 4h, max_iterations: 100, patience: 15"

Typical Use Cases

Workflow

Phase 0: Parse Task & Setup

1. Parse $ARGUMENTS to extract:

• Program: what to run (command, script, or Makefile target)
• Parameter space: which knobs to tune and their ranges/options (may be incomplete — see step 2)
• Objective metric: what to optimize (and how to extract it from output)
• Constraints: hard limits that must not be violated (e.g., timing must close)
• Timeout: wall-clock budget
• Success criteria: when is the result "good enough" to stop early?

1. Infer missing parameter ranges — If the user provides parameter names but NOT ranges/options, you MUST infer them before exploring:

a. Read the source code — search for the parameter names in the codebase:

• Look for argparse/click definitions, config files, Makefile variables, module parameters, #define, parameter (SystemVerilog), localparam, etc.
• Extract defaults, types, and any comments hinting at valid values

b. Apply domain knowledge to set reasonable ranges: | Parameter type | Inference strategy | |---------------|-------------------| | Cache/memory sizes | Powers of 2, typically 1KB–16MB | | Associativity | Powers of 2: 1, 2, 4, 8, 16 | | Pipeline width / issue width | Small integers: 1, 2, 4, 8 | | Buffer/queue/FIFO depth | Powers of 2: 4, 8, 16, 32, 64 | | Clock period / frequency | Based on technology node; try ±50% from default | | Bound depth (BMC/formal) | Geometric: 5, 10, 20, 50, 100 | | Timeout values | Geometric: 10s, 30s, 60s, 120s, 300s | | Boolean/enum flags | Enumerate all options found in source | | Continuous (learning rate, threshold) | Log-scale sweep: 5 points spanning 2 orders of magnitude around default | | Integer counts (threads, cores) | Linear: from 1 to hardware max |

c. Start conservative — begin with 3-5 values per parameter. Expand range later if the best result is at a boundary.

d. Log inferred ranges — write the inferred parameter space to dse_results/inferred_params.md so the user can review:

      # Inferred Parameter Space

      | Parameter | Source | Default | Inferred Range | Reasoning |
      |-----------|--------|---------|---------------|-----------|
      | CACHE_SIZE | config.py:42 | 32768 | [8192, 16384, 32768, 65536, 131072] | powers of 2, ±2x from default |
      | ASSOC | config.py:43 | 4 | [1, 2, 4, 8] | standard associativities |
      | BMC_DEPTH | run_bmc.py:15 | 10 | [5, 10, 20, 50] | geometric, common BMC depths |

e. Boundary expansion — during the search, if the best result is at the min or max of a range, automatically extend that range by one step in that direction (but log the extension).

1. Read the project to understand:

• How to run the program
• Where results are produced (stdout, log files, reports)
• How to parse the objective metric from output
• Current/baseline configuration (if any)

1. Create working directory: dse_results/ in project root

• dse_results/dse_log.csv — one row per design point
• dse_results/DSE_REPORT.md — final report
• dse_results/DSE_STATE.json — state for recovery
• dse_results/inferred_params.md — inferred parameter space (if ranges were not provided)
• dse_results/configs/ — config files for each run
• dse_results/outputs/ — raw output for each run

1. Write a parameter extraction script (dse_results/parse_result.py or similar) that takes a run's output and returns the objective metric as a number. Test it on a baseline run first.

1. Run baseline (iteration 0): run the program with default/current parameters. Record the baseline metric. This is the point to beat.

Phase 1: Initial Exploration

Goal: Quickly survey the space to understand which parameters matter most.

Strategy: Latin Hypercube Sampling or structured sweep of key parameters.

1. Pick 5-10 diverse design points that span the parameter ranges
2. Run them (in parallel if independent, via background processes or sequential)
3. Record all results in dse_log.csv: `` iteration,param1,param2,...,metric,constraint_met,timestamp,notes 0,default,default,...,baseline_val,yes,2026-03-13T10:00:00,baseline 1,val1a,val2a,...,result1,yes,2026-03-13T10:05:00,initial sweep ... ``
4. Analyze: which parameters have the most impact on the objective?
5. Narrow the search to the most sensitive parameters

Phase 2: Directed Search

Goal: Converge toward the optimum by making informed choices.

Strategy: Adaptive — pick the approach that fits the problem:

• Few parameters (≤3): Fine-grained grid search around the best region from Phase 1
• Many parameters (>3): Coordinate descent — optimize one parameter at a time, holding others at current best
• Binary/categorical params: Enumerate promising combinations
• Continuous params: Binary search or golden section between best neighbors
• Multi-objective: Track Pareto frontier, explore along the front

For each iteration:

1. Select next design point based on results so far:

• Look at the trend: which direction improves the metric?
• Avoid re-running configurations already evaluated